2. Tighten barrel screws.
3. Re-install fluid tube.
4. Re-install trigger.
Rear Cover/Motor Module Repair
1. Loosen cover screw with 3mm driver.
2. Remove fan air cartridge with 10mm wrench.
3. Remove rear cover and cartridge with 15mm
wrench.
Re-Install Barrel
1. Install barrel over cascade.
NOTE
NOTE
The gasket between the handle and barrel is reuse-
able. It should not be replaced unless torn or damaged.
AH-17-02-R1 (10/2019)
32 / 55
www.carlisleft.com
MAINTENANCE
EN
