Fluid Nozzle Removal
1. Insert 80353-00 wrench onto nozzle flats.
2. O-ring in barrel, replace as required.
3. Install fluid nozzle
using 80353-00
wrench. Tighten
till nozzle seats on
O-ring and then 1/8
additional turn.
2. Clean and replace as necessary.
3. Install in reverse order.
Barrel Removal
1. Remove trigger.
WA R N I N G
!
Prior to removing the fluid nozzle, all pressure
from the system must be relieved.
NOTE
Do not over tighten. Fan pattern reduction will
be effected
AH-17-02-R1 (10/2019)
28 / 55
www.carlisleft.com
MAINTENANCE
EN
