2. Remove fluid tube.
3. Pull barrel away.
Remove/Replace Cascade
1. Pull cascade straight out.
2. Carefully disconnect harness by pulling connector on both
sides by hand and rocking it side to side to remove.
3. Replace cascade as necessary.
4. Apply LSCH 0009 grease to end of cascade.
5. Re-connect harness by pushing down to snap.
6. Re-install cascade into handle.
CAUTION
!
Do not pull with excessive force or twist wires. This
could damage casscade connector or wire harness.
AH-17-02-R1 (10/2019)
29 / 55
www.carlisleft.com
MAINTENANCE
EN
