RANSFLEX NEW FEATURES
• Light weight and easy to maneuver.
• Ergonomic handle design to reduce
operator fatigue.
• Three phases of turbine protection:
- Divorced turbine air supply cartridge
- Sealed nozzle/Atomization passages
- Strategic turbine location
• DeVilbiss spray technology integration
into atomization.
• Simultaneous fan/atom pressure adjustment with
compensation valve.
GENERAL DESCRIPTION
The
Ransflex
is an air atomizing applicator powered only
by a pressurized air source. Pressurized air creates rotation
of a turbine generator that powers a cascade. The cascade
generates a high voltage DC charge to the electrode creating
an electrostatic field between the atomizer and the target.
One of the many features of the Ransflex applicator system
is that the electrical energy, which is available from the
resistive charging electrode, is limited to the optimum level
of safety and efficiency. The system is incapable of releasing
sufficient electrical or thermal energy during normal
operating conditions to cause ignition of specific hazardous
materials in their most easily ignited concentrations in air.
As the applicator electrode approaches ground, applicator
circuitry causes the high voltage to approach zero while the
current approaches its maximum value. This performance
is validated by independent test agencies that give ATEX
EN 50050 approvals or FM 7260 approvals.
This Ransflex model is designed specifically for indirect
charge waterbase applications only. The design eliminates
the need for isolation equipment normally needed for use
with electrostatic waterborne applications.
The water base materials must be classified as non-flamable
spray material. This means the mixture with air cannot be
ignited by an energy source less than 500 mJ.
INTRODUCTION
AH-17-02-R1 (10/2019)
13 / 55
www.carlisleft.com
INTRODUCTION
EN
