Cardiac Science Atria 3100, Operating Instructions Manual

Page: 16 / 136

2
Equipment Setup
2-2 Atria Electrocardiograph Operating Instructions 70-00082-01 A
The input power cable includes a 3-conductor, medical grade power cable.
Using the two power cables supplied, connect line power, in the following
order:
1. Connect the external power supply (part number: 010-1684-00) to the
External Power Connector (labeled C, below) on the back of the Atria.
2. Connect the AC power cable to the external power supply.
3. Connect the AC power cable to a properly grounded, medical grade
wall outlet.
Figure 2-1
Back Panel
NOTE: For communication connections refer to
“Communications Setup” on pg. 5-1.
!
WARNING
Misdiagnosis. Using unshielded or excessively long cables may cause or
increase susceptibility to electromagnetic interference.
Always use the shortest possible shielded cables.
!
Caution
Equipment damage. The Atria must be operated only at the line voltage
and frequency specified on the external medical grade power supply (part
number: 010-1684-00).
Key
A Equipotential
grounding
Connect equipotential ground cable here. (See
“Equipotential Ground” on pg. 2-1.)
B Power indicator
The green LED indicates the Atria is connected
to AC power.
C External power
connector
Connect cable from power external power
supply here.
NOTE: The Atria does not have an AC power
switch. To shut off AC power, unplug the Atria
from the AC outlet.
A B C