Cardiac Science Atria 3100, Operating Instructions Manual

Page: 108 / 136

10 Troubleshooting
10-4 Atria Electrocardiograph Operating Instructions 70-00082-01 A
Printing
NOTE: For information on troubleshooting your plain
paper printer, refer to the printer’s Operator Manual.
PROBLEM PROBABLE CAUSE
Paper jammed or misaligned. • The Atria not used for extended period
of time with paper installed. Reload
paper, see “Loading Recording Paper”
on pg. 2-5.
Print quality is very light. • The Atria is being used with
unapproved paper. Use only Cardiac
Science Corporation -approved paper.
• Paper type in use is Assurance, but
paper type selected in system settings
is HeartLine. Change paper type in
settings to Assurance (see “Paper
Type” on pg. 4-13).
Print quality is very dark. • The Atria is being used with
unapproved paper. Use only Cardiac
Science Corporation -approved paper.
• Paper type in use is HeartLine, but
paper type selected in system settings
is Assurance. Change paper type in
settings to Standard (see “Paper Type”
on pg. 4-13).
Problems using full format paper. • Load paper (see “Loading Recording
Paper” on pg. 2-5)
• Ensure the paper is at top-of-form by
pressing
[Form Feed]
and waiting
until the paper stops. If Out of Paper
message is displayed, press
[Select]
.
• Press
[Manual Rhythm]
. When
printing starts, press
[Stop]
. Again,
press
[Manual Rhythm]
. When
printing starts, press
[Stop]
.
Report is printing STAT in the Patient ID
field of the report.
• No patient last name and ID number
was entered for the patient.