Cardiac Science Atria 3100, Operating Instructions Manual

Page: 20 / 136

2
Equipment Setup
2-6 Atria Electrocardiograph Operating Instructions 70-00082-01 A
5. Pull the paper out so it covers the door.
IMPORTANT: THE EDGES OF THE PAPER MUST BE CEN-
TERED BETWEEN AND PARALLEL TO THE DOOR GUIDES
ON THE PAPER DOOR.
6. Slide the door firmly until it snaps into place.
7. Press
[On/Stby]
to power on the unit and then wait until the unit
beeps.
8. Press
[Form Feed]
three to five times.
Ensure the paper tracking is straight. If the paper is not
straight, repeat this procedure from Step 1, until the paper is
straight.
9. Tear off extra pages at the perforation.
NOTE: You must select the correct paper type. The default
paper setting is
Assurance
. If using HeartLine paper, see
“Paper Type” on pg. 4-13 to change the setting.
Loading Paper: Removable Door Models
Figure 2-4
Atria Paper Tray
Removed
To load paper:
1. Remove the paper tray door on the left side of the Atria.
a. Squeeze paper door lever, in the middle of tray, until
it clicks.
b. Pull out door completely, taking care not to drop the
door.
2. Place a stack of paper into the compartment so that the black queue
mark on the lower left corner of the paper is visible.
3. With your right hand, lift the top sheet of paper.
4. Align the door on the track, and slide the door most of the way into the
unit. DO NOT INSERT THE DOOR AT AN ANGLE.