Cardiac Science Atria 3100, Operating Instructions Manual

Page: 54 / 136

5 Communications Setup
5-6 Atria Electrocardiograph Operating Instructions 70-00082-01 A
PPP SETUP
Use the PPP setting to connect the Atria to a PPP Server.
1. Select
Network Type
>
Ethernet
>
Use DHCP
:
• (Recommended) Select
ON
for dynamic IP address
assignment.
• Select
OFF
for fixed IP address assignment.
2. Enter the following:
a. When DHCP is
OFF
enter:
-
IP address
(IP Address for the Atria, typically
assigned by the network administrator.)
-
Subnet Mask
(typically 255.255.255.0)
-
Gateway
(IP address for the Gateway)
b.
PPP Phone Number
(phone number of the PPP Server)
c.
PPP Phone Type
(select
TOUCH TONE
or
Pulse
)
d.
PPP User
(user name set up on the PPP server)
e.
PPP Password
(the password set up for the PPP user)
f.
UTC/GMT Time Zone Offset
- The default is 6 for Central Standard Time
- For other time zones, use the Time Zone listed on
your computer.
- See the Time Zone instructions and note on 5-4 for
configuring the
UTC/GMT Time Zone Offset
.
Security Settings: Supplicant Configuration
Use the Supplicant Configuration setting to configure the Atria with a
custom configuration when the standard security options are not
compatible with your wireless network. Use the Supplicant Configuration
option if your wireless network requires the use of digital certificates.
To configure a supplicant configuration complete the following steps:
• Create a supplicant configuration file.
• Install the configuration file on the Atria.
• Install the digital certificate on the Atria.
• Configure the Atria to use the supplicant configuration.