Cardiac Science Atria 3100, Operating Instructions Manual

Page: 90 / 136

8 Patient Records
8-8 Atria Electrocardiograph Operating Instructions 70-00082-01 A
SELECT RECORDS TO SEND
This menu allows you to review each record for send status. For each
record, you may select to send or place the record on hold. The send status
defaults to send. You may change the send status for a record at any time.
1. Press
[Send/Rec]
.
2. Select
Select Records to Send
.
3. Review send status.
4. To change send status:
a. Select the record to change status.
b. Select
Hold
or
Send
and press
[Select]
.
Fax a Patient Record
Patient records can only be faxed if the fax option is enabled and properly
set up. Refer to the beginning of Chapter 5 for general communications
setup and “Setup Fax” on pg. 5-10.
1. Press
[Home].
2. Press
[Patient]
.
3.
Select
View Patient Directory
.
4. Scroll down and select the desired patient.
The
ECG Review
menu displays.
5. Select
Fax ECG
.
6. Select the desired fax destination.
!
WARNING
Misdiagnosis. ECG reports images viewed or printed in .pdf format at a
size other than 100% may be appear distorted.
Also, records sent by fax may not be suitable for diagnostic use due to the
low resolution of some fax receiving equipment.