Cardiac Science Atria 3100, Operating Instructions Manual

Page: 50 / 136

5 Communications Setup
5-2 Atria Electrocardiograph Operating Instructions 70-00082-01 A
Equipment Connections
Figure 5-1
Back Panel
!
WARNING
Trip hazard. Route all cables away from main work areas to minimize risk
of tripping and injury.
Key
A
Modem
RJ11 port to connect telephone cable.
B
Network
RJ45 port to connect network cable.
NOTE: Do not insert the telephone cable in the Network port.
C
USB host
1
USB type A port to connect USB printer or USB wireless adapter.
D
Serial
RS-232 a 9pin serial port to connect external fax/modem or direct
connection to management system.
E Analog
output
Analog port to connect a monitor or other device. (Contact
Technical Support for approved cables).
1
The Atria conforms to the all safety and essential performance standards. Every effort has been
made to ensure the Atria will be safe when used with systems containing other equipment. When
Atria is connected to another device using a USB cable, it is important to ensure the cable will
not create excessive radio frequency emissions. To minimize this risk, a ferrite cable emissions
reducer (p/n 040-1508-00) is available as an Atria accessory (see the Accessories List for
ordering instructions) and must be used with any USB cable connected to the Atria. Follow the
installation instructions supplied with the ferrite cable emission reducer.
B
A
C
D
E