Cardiac Science Atria 3100, Operating Instructions Manual

Page: 25 / 136

Keyboard
70-00082-01 A Atria Electrocardiograph Operating Instructions 3-3
Keyboard
The following table describes the Atria keys.
NOTE: Not all key functions are available on every screen.
Function Key Description
Main Power [On/Stby] Powers on the Atria
When the Atria is on, press this key to:
• Power off the Atria when operating on battery power.
• Go to Standby when connected to external power
(The battery continues to charge.)
User
At the Home screen [Alt]
+
[1]
or
[2] Select either User 1 or User 2. See “Multiple Users” on
pg. 4-1.
ECG
Press
[Stop]
at any
time stop printing
and return to the
Home screen
[ECG] Acquire and print a 12-lead ECG (a series of reports
using pre-programmed lead sequences and settings).
[Auto Rhythm] Print an auto rhythm report (a rhythm strip with a pre-
selected number of pages using the leads currently
selected).
[Manual Rhythm] Print a manual rhythm report (a continuous rhythm strip
of the leads currently selected). This report runs until the
[Stop]
key is pressed.
ECG Settings
(Number Keys) [1]
,
[2]
,
[3]
, or
[4] To select pre-programmed lead triplets. The leads are
printed on manual rhythm and auto rhythm reports.
[5]
or
[6] Custom lead 1 or Custom lead 2 to select user-defined
leads.
The leads are printed on manual rhythm and auto rhythm
reports. See “Custom Lead Settings” on pg. 4-9 for setup
information.
[7] Select paper speed (12.5, 25, or 50 mm/sec).
[8] Select ECG gain (5 mm/mV, 10 mm/mV, 20 mm/mV; L10,
C5 mm/mV; or L20, C10 mm/mV.
[9] Toggles the upper ECG filter frequency response (40 or
150 Hz).
[0] For a 1 mV calibration pulse on auto or manual rhythm
printouts.