Canon VB-S30D MKII, Operating Manual

Page: 161 / 185

List of Log Messages
161
Appe
ndi
x
6
„
HTTP Server Messages
H143 User name specification error [notice]
H144 Password specification error [notice]
H201 Timeout disconnect [warning]
„
System Messages
S001 System started [info]
S002 System settings changed [info]
S010 Event service started [info]
S011 Event service shut down [info]
S012 External device service started [info]
S013 External device service shut down [info]
S014 Timer service started [info]
S015 Timer service shut down [info]
S070 Change to SSL certificate [info]
S302 Error on saving settings [err]
S303 Error on saving settings [err]
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
Description (http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
Description starting paramd (S001)
Meaning Parameter management module started.
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
Description starting event (S010)
Meaning The event service was started.
Description shutdown event (S011)
Meaning The event service was shut down.
Description starting extio (S012)
Meaning The external device input/output service
was started.
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
Description starting timer (S014)
Meaning The timer service was started.
Description shutdown timer (S015)
Meaning The timer service was shut down.
Description ssl: succeeded to %1 certificate (S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/deleted/
restored
Countermeasure None
Description Can’t update system settings (S302)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description Can’t update files of system settings (S303)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.