Canon VB-S30D MKII Operating Manual Download Page 104

Page: 104 / 185

104

Abandoned Object Detection

Detect objects that are carried in and abandoned for a certain amount of time. This function

can be used to detect objects that have been left.

Abandoned object detection is triggered when an object is left in the detection area for a

specified duration.

Object abandoned.

Background Video Generated

Detected

Change in Designated Area

Analysis

Abandoned Object Detected

The object is abandoned
and detection begins
after set time.

Removed Object Detection

Detect objects that are being removed. This function can be used to detect actions such as

taking away valuables.

Removed object detection is triggered when an object is removed from the detection area

for a specified duration.

Removing an object.

Background Video Generated

Detected

Change in Designated Area

Analysis

Object Removal Detected

The picture (object) is
removed and detection
begins after set time.

Camera Tampering Detection

Detect when the capture is being obstructed. This function can be used to detect when the

camera orientation is changed or the video display is obstructed with spray, etc.

Camera tampering detection is triggered when an area exceeding the set ratio is

continuously altered by an object, etc.

Tampering detected.

Background Video Generated

Detected

Video Area Changes

Analysis

Camera Tampering Detected

Detection begins when a portion
of the video that exceeds the set
ratio is continuously altered.

Summary of Contents for VB-S30D MKII


























































































































































































Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands

Canon VB-S30D MKII, Operating Manual

Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands