Canon VB-S30D MKII Operating Manual Download Page 139

Page: 139 / 185

How to Operate the Viewer

139

min Viewer/

iewer

You can move any panel by clicking the title bar and

dragging it to the desired position.

Getting a Snapshot

Captures a still image from live video and displays it in a

new window.

You can also save still images.

Click [Get a Snapshot] button at the moment you want to

capture a still image.

A snapshot panel will open showing a still image from the

moment you clicked it. When the snapshot panel is open,

click the [Get a Snapshot] button to update the image

displayed in the snapshot panel.

To save a still image, right-click on it and select the save

option from the menu that appears.

Enter the file name desired and save the image.

Note

• The snapshot is saved as a JPEG file.

• The saved snapshots are the same size as the video capture

size.

Reconnect

To reconnect the camera, click this button.

Note

If you reconnect, audio reception will stop and camera control
privileges will be lost.

Receiving Audio

You can receive audio through the microphone attached

to the camera.

Click this button to receive audio.

Select the [Receive audio] checkbox in the Receive Audio

panel that appears and use the slider to set an

appropriate volume.

Note

• To receive audio, set [Server] > [Audio Server] > [Audio

Transmission from the Camera] to [Enable] in the setting pages

beforehand (p. 58).

• The first time the Receive Audio panel is launched from the VB

Viewer, a message to install the “Canon Network Camera Audio

Receiver” add-on will be displayed in the information bar of the web
browser. Install the add-on.

• Regardless whether or not the Receive Audio panel is open, audio

will always be received if the [Receive audio] checkbox is selected

in the Receive Audio panel.

• To use the audio function in environments that use a proxy server,

the camera IP address must be specified in [Internet options] >

[Connections] > [LAN settings] > [Proxy server] > [Advanced] >
[Exceptions] of Internet Explorer.

Icon

Meaning

Receiving audio

Not receiving audio

Summary of Contents for VB-S30D MKII


























































































































































































Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands

Canon VB-S30D MKII, Operating Manual

Search results

Summary of Contents for VB-S30D MKII

Reviews:

Related manuals for VB-S30D MKII

Brands by name

Popular brands