Canon Pixma MG2500 Series, Online Manual

Page: 123 / 176

Print after creating print data by page
The print data is created in page units, and printing starts after the processing of
one page of print data is complete.
If a printed document contains unintended results such as streaks, selecting this
check box may improve the results.
Important
Uncheck this check box under normal circumstances.
Scale images using nearest-neighbor interpolation
When an image is to be enlarged or reduced when printed, the printer uses a simple
interpolation process to enlarge or reduce the image.
If the image data in a printed document is not printed clearly, selecting this check
box may improve the results.
Important
Uncheck this check box under normal circumstances.
Note
Scale images using nearest-neighbor interpolation can be used only with
the XPS printer driver.
Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application
software and then print the data.
Depending on the application software being used, the image data may be cut off or
may not be printed properly. In such cases, select
On . If you will not be using this
function, select Off .
Important
When using this function, the print quality may drop depending on the print
data.
Unit of Print Data Processing
Selects the processing unit of the print data to be sent to the machine.
Select
Recommended under normal circumstances.
Important
A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
123