Canon PIXMA iP7200 Series, Manual

Page: 619 / 637

Home > Troubleshooting > Problems with Printing > Printing Stops Before It Is Completed
U322
Printing Stops Before It Is Completed
Check 1: Is the inner cover (the cover of the disc tray) opened while
printing on paper?
Close the inner cover and press the RESUME/CANCEL button on the printer.
Check 2: Is the paper loaded?
Make sure that paper is loaded.
If the printer has run out of paper, load paper.
Check 3: Do the printing documents have lots of photographs or
illustrations?
As printing large data such as photos or graphics takes time for the printer and the computer to
process, the printer may appear to have stopped operating.
In addition, when printing data that uses a large amount of ink continuously on plain paper, the printer
may pause temporarily. In either case, wait until the process is complete.
Note
If you are printing a document with a large printing area or printing multiple copies of a document,
printing may pause to allow the ink to dry.
Check 4: Has the printer been printing continuously for a long period?
If the printer has been printing continuously for a long time, the print head or other parts around it may
overheat. The printer may stop printing at a line break for a period of time and then resume printing.
In this case, wait for a while without operation. If the printing still does not resume, interrupt your print
session at a convenient time and turn the printer off for at least 15 minutes.
Caution
The print head and the surrounding area can become extremely hot inside the printer. Never
touch the print head or nearby components.
Page top