3-10
Using the MultiPASS Fax Setup Utility
Chapter 3
Ring Tone
You can set the volume level of the ring tone. The default is Medium.
Ring Time
When your MultiPASS is set to receive both fax and telephone calls, it
rings to inform you of an incoming telephone call. If you do not pick up
the telephone within a certain amount of time, the MultiPASS stops
ringing. You use this option to set the appropriate amount of time the
MultiPASS should ring. The default is 15 seconds.
Default Action If No Answer to Telephone
You set this option to Receive if you want the MultiPASS to handle an
incoming call, detected as a telephone call that is not answered, as an
incoming fax. If no fax is received, the line is then disconnected. When
this option is set to Disconnect, the MultiPASS automatically disconnects
the unanswered call, without trying to receive a fax. The default is
Receive.
Answering Machine Mode Options
You use this option only if you set the Receive mode on the Receive Fax
panel to answering machine mode (AnsMode), and your fax sender may
be using a fax machine that does not emit a send fax signal.
Receive Fax If No Signal
Select this option to have the MultiPASS automatically receive a call as a
fax call if a send fax signal is not detected for the number of seconds you
specify. Clear this option to have the MultiPASS remain in answering
machine mode even if no send fax signal is detected. If no sound is
detected by the MultiPASS (such as the caller speaking to leave a
message), the answering machine disconnects.
Silent Period
Set the number of seconds you want the MultiPASS to check for a send
fax signal. The default is 4 seconds.
Remote Receive
You select this option so that you can receive a fax by pressing an ID
code on the telephone attached to the MultiPASS. If you select this
option, you must assign a remote identification number that signals the
MultiPASS to receive the fax. The default is Remote Receive.
Remote Identification Number
If you enable the Remote Receive option, you assign the identification
number you will use to set the MultiPASS to receive a fax. The default
number is 25.
Summary of Contents for MP-C635
Page 1: ...MP C635 USER MANUAL Canon...
Page 2: ...C635...
