Canon MP-C635 User Manual Download Page 134

Page: 134 / 216

7-2

Maintaining the MultiPASS C635

Chapter 7

MultiPASS Guidelines

Follow these guidelines to avoid damage to your MultiPASS and harm to
you or others:

❍

Place the MultiPASS on a stable surface. Do not use an angled stand.
Avoid setting the unit in direct sunlight.

❍

Do not install the MultiPASS near devices that contain magnets or
generate magnetic fields, such as speakers.

❍

Do not subject the MultiPASS to strong physical shock or vibration.

❍

Make sure the area where you use the unit is free from dust.

❍

Keep the MultiPASS clean. Dust accumulation can prevent the unit
from operating properly.

❍

To assure proper electrical contact, make sure the unit is firmly
plugged in.

❍

Never pull on the cord to unplug the MultiPASS. Pull on the plug
itself.

❍

Do not overload the electrical outlet where the MultiPASS is plugged
in.

❍

For your safety, unplug the MultiPASS during electrical storms.

❍

Lift the MultiPASS from the bottom only. Do not lift the unit by the
operator panel or any of its trays.

MPC-635—USERS MANUAL/V000/06-99

GRIP HERE

MPC_5500

Summary of Contents for MP-C635

























































































































































































































Search results

Summary of Contents for MP-C635

Reviews:

Related manuals for MP-C635

Brands by name

Popular brands

Canon MP-C635, User Manual

Search results

Summary of Contents for MP-C635

Reviews:

Related manuals for MP-C635

Brands by name

Popular brands