Canon MAXIFY iB4140, Online Manual

Page: 286 / 658

Changing WPA or WPA2 Detailed Settings
Note
• This function is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the printer after modifying the
settings.
The example screenshots in this section refer to the WPA detailed settings.
1. Start up IJ Network Tool.
2. Select printer in Printers: .
When the printer is connected to the computer with a USB cable temporarily, select the printer with USB
appearing in the Connected to column.
3. Click Configuration... button.
4. Click Wireless LAN button.
5. Select Use WPA/WPA2 in Encryption Method: and click Configuration... .
6. Enter passphrase and click OK .
1. Passphrase:
Enter the passphrase set to the wireless router. The passphrase should be a string of 8 to 63
alphanumeric characters or a 64-digit hexadecimal value.
If you do not know the wireless router passphrase, refer to the instruction manual provided with
the wireless router or contact its manufacturer.
2. Dynamic Encryption Type:
The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
encryption) automatically.
Important
• If Auto is not displayed on Dynamic Encryption Type: , select either TKIP(Basic Encryption) or
AES(Secure Encryption) .
286