manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 80 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 80

3-3

Power Saving (Power Save Mode)

Using the Pr

inter

3

■

Power Save Mode 2 (Deep Sleep Mode) ... Power-saving effect: Large

The printer enters Power Save Mode 2 when it is in the following condition.

* Even when SMB SERVER is set to ON, the printer enters Power Save Mode 2 if the "server name" for SMB is not 

entered.

IMPORTANT

Even if POWER SAVE MODE is set to PANEL OFF or OFF, the printer enters Power 
Save Mode 2 when [Deep Sleep] is executed in [Device Control] in the Remote UI.

NOTE

•

When the printer enters Power Save Mode 2, only the Power indicator comes on.

•

Power Save Mode 2 can be released when the printer is in any of the following status:
- When the 

 (Online) key on the control panel is pressed

- When the printer receives data from the computer (Only when the printer is online)
- The settings for [Utility Menu] are specified in the Remote UI

•

The printer does not enter Power Save Mode 2 in the state where a DHCP 
communication can be done.

Condition 

POWER SAVE MODE is set to DEEP SLEEP.

The printer has already entered Power Save Mode 1.

USB in I/F CONNECTION is set to OFF.

APPLETALK in NETWORK MENU is set to OFF.

SMB SERVER in NETWORK MENU is set to OFF*.

There is no job on the print queue.

The printer has not communicated on the network for more than 15 seconds.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments