manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 22 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 22

xix

•

The face-up output slot and its surroundings become hot during or immediately after 
using the printer. Do not touch the face-up output slot and its surroundings, as doing 
so may result in burns.

•

The paper may be hot immediately after being output. Be careful when removing the 
paper as well as when aligning the removed paper, especially after printing 
continuously. Otherwise, this may result in burns.

•

The laser beam can be harmful to human bodies. Since radiation emitted inside the 
printer is completely confined within protective housings and external covers, the 
laser beam cannot escape from the printer during any phase of user operation. Read 
the following remarks and instructions for safety.

- Never open covers other than those instructed in this manual.

- Do not remove the caution label attached to the cover of the laser scanner unit.

- If the laser beam escapes from the printer, exposure may cause serious damage to 

your eyes.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments