manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 180 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 180

6-13

Pr

inting En

vironment Settings

6

SETUP Menu Settings

PANEL LANGUAGE

ENGLISH*, FRENCH, GERMAN, ITALIAN, SPANISH

Confirm the language that is displayed in the display.

SHOW WARNINGS

CASSETTE EMPTY .............ON*, OFF

A Warning status is a status in which the printer requires some remedy although 
the job is not affected. When the printer is in this status, an indicator blinks.

This item allows you to specify whether an indicator should blink when the printer 
is in the following Warning status.

NOTE

The printer prints when either ON or OFF is specified.

PDL SELECT(PnP)

UFR II, PCL5E, PCL6

●

If you want to connect the printer and computer with a USB cable

The printer driver for this printer may be installed automatically when the USB 
cable is connected. 
You can select the type of the printer driver ("UFR II", "PCL5e", or "PCL6") to be 
installed in this item at the time.

●

If you want to connect the printer and computer with a LAN cable

If you are using Windows Vista, you can detect the printer automatically using the 
WSD (Web Service on Devices) protocol. 
You can select the type of the printer driver ("UFR II", "PCL5e", or "PCL6") to be 
installed on the automatically detected printer in this item.

IMPORTANT

•

When installing the printer driver manually, be sure to match the setting of this item 
and the type of the printer driver to be installed. You cannot use printer drivers of a 
different type.

•

After changing the settings for this item, cycle the power of the printer or perform a 
hard reset to make the settings effective.

Setting

Status

Indicator Blink

CASSETTE 
EMPTY

When the paper cassette 
has run out of paper

The 

 (Paper Source) indicator for 

the paper source that has run out of 
paper blinks.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments