Canon LBP 3370, User Manual, Page: 302 / 362

8-43
Tr
oub
leshooting
8
When You Cannot Obtain Appropriate Printout Results
Cause 2 "Top Margin" and "Paper Position" in the application are not specified
properly.
Remedy Specify the settings for "Top Margin" and "Paper Position" in the application
properly, and then print again. (See the instruction manual supplied with your
application)
Cause 3 The printing position has been adjusted in ADJ.START POS. in the USER
MAIN. options in the SETUP menu.
Remedy Adjust the printing position to an appropriate value using ADJ.START POS. in
the USER MAIN. options in the SETUP menu. (See "Adjusting the Printing
Position," on p. 7-22)
The next page is printed from halfway across the previous page.
Cause "Line Spacing" or "Lines/Page" in the application is not specified
properly.
Remedy Specify the settings for "Line Spacing" and "Lines/Page" in the application so
that data fits in one page, and print again. (See the instruction manual supplied
with your application)
Data is printed with its size reduced.
Cause The printer is set to reduce the print size.
Remedy Confirm the setting for [Manual Scaling] in the printer driver. (See Driver Guide)
Paper comes out wrinkled.
Cause 1 Paper is loaded in the paper cassette or multi-purpose tray at an angle.
Remedy Load the paper in the paper cassette or multi-purpose tray straight. (See
"Loading Standard Size Paper," on p. 4-20, "Loading Paper (Other than
Envelopes)," on p. 4-35)
Cause 2 Paper is damp since the paper has been stored in unsuitable condition.
Remedy Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 4-2)
Paper curls.
Cause 1 Paper is damp since the paper has been stored in unsuitable condition.
Remedy Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 4-2)