manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 286 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 286

8-27

Tr

oub

leshooting

8

Message List

Cause 3

The connector of the optional paper feeder is disconnected.

Remedy

Turn the printer OFF, unplug the power plug from the AC power outlet and 
contact your local authorized Canon dealer.

Cause 4

A paper feeder that is not for this printer is installed.

Remedy

Turn the power OFF, install the paper feeder for this printer, and then turn it ON 
again.

<11 NO "size" PAPER>

Cause

Paper of the size specified in the application is not loaded in the paper 
source (in all the paper sources when PAPER SOURCE is set to AUTO; in 
the specified paper source when the setting is fixed).

Remedy 1 Refill or load paper.

Remedy 2 Press the 

 (Feeder Selection) key, then select other paper source for the 

same paper size or larger paper size. (See "Selecting a Paper Source," on p. 
4-11)

<12 COVER OPEN>

Cause

The front cover is open.

Remedy

Close the front cover firmly. If the printer is not online, press the 

 (Online) 

key.

<13 PAPER JAM>

Cause

Paper is jammed inside the printer

Remedy

Remove the jammed paper and set the paper cassette and covers to the 
original position. If the printer is not online, press the 

 (Online) key. (See 

"Paper Jams," on p. 8-4)

IMPORTANT

•

If paper jams have occurred at multiple areas at the same time, the areas appear in the 
display by rotation.

•

If you have removed the jammed paper without opening any cover, be sure to open and 
close the front cover once, and then press the 

 (Online) key.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments