manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 203 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 203

6-36

Pr

inting En

vironment Settings

6

SETUP Menu Settings

■

INIT.N/W SET.

-

By the initialization in this item, you can reset the network settings to the default 
settings.

The network settings can be initialized using the following procedure.

1.

Press the 

 (Settings) key.

2.

Select INTERFACE MENU using [

] and [

], then press [OK].

3.

Select NETWORK MENU using [

] and [

], then press [OK].

4.

Select INIT.N/W SET. using [

] and [

], then press [OK].

5.

<OK?> is displayed. The initialization starts by pressing [OK].

* If you press the 

 (Online) key without pressing [OK], the printer does not initialize the settings but 

becomes ready to print.

NOTE

This item is displayed only when NETWORK in the I/F CONNECTION options is 
set to ON.

CONNECT.RECOG.

ON*, OFF

When you print using a network, you may not obtain proper printout results 
(Unreadable characters are printed, etc.). In this case, specify OFF for this item.

PRINT MODE Options

MODE SELECTION

PCL*, IMAGING

Specifies the mode in which this printer operates when you print without using the 
printer driver for this printer.

If the print mode is not appropriate, such a printing problem as unreadable 
characters being printed may occur. Specify this item according to the data to be 
printed.

NOTE

The IMAGING mode is used for the direct print function.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments