manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 205 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 205

6-38

Pr

inting En

vironment Settings

6

SETUP Menu Settings

RECVRY PRINTING

ON*, OFF

Specifies whether to print the partially printed page when the printer stops printing 
due to a paper jam or an error occurring.

If ON is specified for this item, the printer prints from the page in which a paper 
jam or error occurred.

If OFF is specified for this item, the printer does not print from the partially printed 
page but prints from the next page when a paper jam or error has occurred.

When the printer is performing 2-sided printing, it does not print the reverse page 
of the partially printed page. The printing starts from the front side of the next 
sheet.

CHK PAPER SIZE

OFF*, ON

Specifies whether the printer should stop printing, displaying the message <41 
CHK PAPER SZE> or continue printing when TRAY PAPER SIZE, CASSETTE1 
SIZE, or CASSETTE2 SIZE is set to MIXED SIZES.

If OFF is specified, the printer may stop printing, displaying <41 CHK PAPER 
SZE>, when the paper size specified in the application is different from the size of 
the paper loaded in the multi-purpose tray or paper cassette. The paper on which 
the error occurred is output automatically. You can also continue printing by 
pressing the 

 (Online) key. However, the data may not be printed properly, or a 

paper jam may occur.

If ON is specified, the printer prints without performing a print check even when 
the paper size specified in the application is different from the size of the paper 
loaded in the multi-purpose tray or paper cassette. However, the printing speed 
may drop. Also, because the paper is printed at the paper size specified in the 
application, blank areas may appear on the printed paper or part of the images 
may be missing when the size of the paper loaded in the multi-purpose tray or 
paper cassette is different from the paper size specified in the application.

IMPORTANT

For automatic 2-sided printing, <41 CHK PAPER SZE> always appears and the 
printer stops printing regardless of the setting for this item.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments