manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 11 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 11

 

viii

 

Preface

 

Thank you for purchasing the Canon LBP3370. 
Please read this manual thoroughly before operating the printer in order to familiarize 
yourself with its capabilities, and to make the most of its many functions. 
After reading this manual, store it in a safe place for future reference.

 

How To Use This Manual

 

 

 

Symbols Used in This Manual

 

The following symbols are used in this manual to explain procedures, restrictions, 
handling precautions, and instructions that should be observed for safety.

WARNING

 

Indicates a warning concerning operations that may lead to death or 
injury to persons if not performed correctly. 
In order to use the printer safely, always pay attention to these warnings.

CAUTION

 

Indicates a caution concerning operations that may lead to injury to 
persons, or damage to property if not performed correctly. 
In order to use the printer safely, always pay attention to these cautions.

IMPORTANT

 

Indicates operational requirements and restrictions. 
Be sure to read these items carefully in order to operate the printer 
correctly, and to avoid damage to the printer.

NOTE

 

Indicates a clarification of an operation, or contains additional 
explanations for a procedure. 
Reading these notes is highly recommended.

 

 

 

Keys and Buttons Used in This Manual

 

The following button names are a few examples of how keys and buttons to be 
pressed are expressed in this manual:

 

•

 

Keys on the Control Panel: Key icon + (Key Name)

Example:  

(Online)

 (Utility)

•

Buttons on Computer Operation Screen : [Button Name]

Example: [OK]

[Reset]

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments