manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 142 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 142

4-45

P

aper Loading and Output 

T

ra

y

4

Loading Paper in the Multi-purpose Tray

IMPORTANT

•

Match the paper size specified in the SETUP menu of the printer and that specified in the 
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this 
case, the setting value for TRAY PAPER SIZE is changed to that in the printer driver by 
pressing the 

 (Online) key, allowing you to continue printing.

•

When custom size paper is loaded, specify the setting for TRAY PAPER SIZE as follows.
- When the paper is loaded in landscape orientation: CUSTOM SIZE
- When the paper is loaded in portrait orientation: CUSTOM SIZE R

•

When you change the paper loaded in the multi-purpose tray frequently, it is convenient if 
TRAY PAPER SIZE is set to MIXED SIZES. If TRAY PAPER SIZE is set to MIXED SIZES, 
you do not need to specify the setting for TRAY PAPER SIZE each time you load different 
size paper. However, when specifying MIXED SIZES, make sure that the size of the 
paper loaded in the multi-purpose tray matches the paper size specified in the printer 
driver before printing. If they do not match, the printer may stop printing, displaying the 
message <41 CHK PAPER SZE>, or a paper jam may occur. Be sure to check if the 
paper size specified in the printer driver matches the size of the paper loaded in the 
multi-purpose tray before using the printer.

•

When printing custom size paper from UFR II Printer Driver, you can load the paper 
either in portrait or landscape orientation. However, if you want to print custom size paper 
of its long edges 215.9 mm or less when TRAY PAPER SIZE is set to MIXED SIZES, load 
the paper in landscape orientation. When you are not printing from UFR II Printer Driver, 
load the paper in portrait orientation.

NOTE

The names of the following paper sizes are indicated by an abbreviation.
Legal: LGL, Letter: LTR, Executive: EXEC, Statement: STMT

1

Press the 

 (Settings) key.

2

Select FEEDER MENU using [

] and [

], then press [OK].

3

Select TRAY PAPER SIZE using [

] and [

], then press [OK].

SETUP

CONTROL MENU   

→

FEEDER MENU    

→

TRAY PAPER SIZE

→

TRAY PAPER SIZE

→

=A4            

→

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments