manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 292 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 292

8-33

Tr

oub

leshooting

8

Message List

<D7 nn ERROR> ("nn" represents two-digit alphanumeric characters)

Cause

A problem has occurred and the printer does not operate properly.

Remedy

Cycle the power of the printer. If the message appears even after cycling the 
power of the printer, note down the message in the display, and contact your 
local authorized Canon dealer.

<D8 LAYOUT ERROR>

Cause

The page cannot be laid out because the memory has run out.

Remedy 1 Set [Graphics Mode] in UFR II Printer Driver to [Raster Mode], then print again. 

(See Help of UFR II Printer Driver)

Remedy 2 After performing a soft reset using the RESET menu, perform a hard reset to 

increase the free memory space or cycle the power of the printer, and then print 
again. (Be aware that all the data in the memory that the printer has received 
will be deleted.)

Remedy 3 Perform "Error Skip", then continue printing. However, the data with which an 

error has occurred is not printed properly.

<D8 VERSION ERROR>

Cause

You tried to print from a printer driver that is not for LBP3370.

Remedy

Print from the printer driver for LBP3370.

<D8 SYNTAX ERROR>

Cause

Invalid data is sent when printing using UFR II Printer Driver.

Remedy 1 Press the 

 (Online) key to continue printing from the next data. However, the 

page with which an error has occurred and its subsequent pages are not 
printed.

Remedy 2 Confirm the data to be printed, then print again.

<D8  nn  ERROR> ("nn" represents two-digit alphanumeric characters)

Cause

A problem has occurred and the printer does not operate properly.

Remedy

Cycle the power of the printer. If the message appears even after cycling the 
power of the printer, note down the message in the display, and contact your 
local authorized Canon dealer.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments