manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 290 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 290

8-31

Tr

oub

leshooting

8

Message List

<41 CHK PAPER SZE>

Cause 1

The size of the paper loaded in the multi-purpose tray or paper cassette is 
different from the setting for TRAY PAPER SIZE, CASSETTE1 SIZE, or 
CASSETTE2 SIZE specified from the computer or control panel.

Remedy

Match the size specified in TRAY PAPER SIZE, CASSETTE1 SIZE, or 
CASSETTE2 SIZE and the size of the loaded paper, and then press the 

 

(Online) key.

Cause 2

You are using UFR II Printer Driver, and you loaded custom paper of its 
long edges 215.9 mm or less and printed when TRAY PAPER SIZE, 
CASSETTE1 SIZE, or CASSETTE2 SIZE in the FEEDER MENU options in 
the SETUP menu was set to MIXED SIZE.

Remedy

Load the paper in landscape orientation, then print again.

Cause 3

CHK PAPER SIZE in the USER MAIN. options in the SETUP menu is set to 
OFF.

Remedy

Set CHK PAPER SIZE (See p. 6-38) to ON, then print again.

<52 RAST.MODE ERR>

<Auto Error Skip>

Cause

The printer received data in format that it does not support during printing 
in the Raster mode.

Remedy 1 The printer continues printing by pressing the 

 (Online) key. However, the 

data may not be printed properly.

Remedy 2 Print again using a printer driver that supports image data formats.

<53 SEC.PRINT ERR>

<Auto Error Skip>

Cause

Secured print data is sent from a printer driver that is not for LBP3370.

Remedy

Press the 

 (Online) key to cancel the job.

<53 STORE ERROR>

<Auto Error Skip>

Cause

The data for which a stored job print is specified is sent from a printer 
driver that is not for LBP3370.

Remedy

Press the 

 (Online) key to cancel the job.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments