manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 219 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 219

6-52

Pr

inting En

vironment Settings

6

RESET Menu Settings

NOTE

•

The 

 (Job) indicator is on when any print data remains in the printer memory or 

when no print data remains in the printer but a job has not yet been completed.

•

If MODE TIMEOUT for a job is specified, data less than one page is also output 
automatically when the specified time has elapsed (Data from PCL/UFR II Printer 
Driver is not output.). MODE TIMEOUT for a job is set to 15 seconds in the default 
settings.

•

If the 

 (Job) indicator does not go off even after outputting the data, perform a 

soft reset. (See the previous item)

SHUT DOWN

-

It is recommended that you shut down the printer using the following procedure 
when you want to turn the printer OFF.

1.

Press the 

 (Reset) key.

2.

Display SHUT DOWN in the RESET menu, then press [OK].

3.

<OK?> is displayed. Press [OK].

4.

When the message <TURN OFF POWER> appears, press "O" of the power switch.

After executing a shutdown, the printer cannot receive data, and panel operation 
is disabled. Cycle the power of the printer if you want to print the data again.

NOTE

If you are using WSD, the shutdown notifies the computer that the printer is turned 
OFF.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments