manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 294 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 294

8-35

Tr

oub

leshooting

8

Message List

<FM SCALE ERROR>

<Auto Error Skip>

Cause

There is a character in which the number of coordinate points on the 
contour lines exceeds the limitation of a pseudo-scalable font.

Remedy

Perform "Error Skip", then continue printing. However, the characters with which 
an error has occurred are not printed properly.

<PC LOAD "size">

Cause

The paper of the size specified in the application is not loaded in the 
paper cassette or multi-purpose tray, or the paper source for the different 
paper size is selected.

Remedy 1 Load the paper of the size selected in the application (or the one specified by 

scaling factors). (See "Loading Paper in the Paper Cassette," on p. 4-17)

Remedy 2 If you are using the multi-purpose tray, check TRAY PAPER SIZE, and when the 

paper size does not match the size specified in the application, specify the 
setting properly. (See "Loading Paper in the Multi-purpose Tray," on p. 4-33)

Remedy 3 Press the 

 (Feeder Selection) key, then select the paper cassette in which the 

paper of the matched size is loaded. (See "Selecting a Paper Source," on p. 
4-11)

Remedy 4 Press the 

 (Online) key, then print to the currently loaded paper forcibly. If 

you are using the multi-purpose tray, the setting for TRAY PAPER SIZE 
automatically changes to the setting specified in the application.

IMPORTANT

If you open the front cover when the message <PC LOAD "size"> is displayed, the 
message may disappear. However, be sure to follow the directions in the displayed 
message to change the paper.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments