manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 215 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 215

6-48

UTILITY Menu Settings

Pr

inting En

vironment Settings

6

UTILITY Menu Settings

NOTE

For the output samples of CONFIG.PAGE, NW STATUS PRINT, and PRNTPOSNPRINT, 
see "The Lists Common to All the Settings in the Print Mode," on p. 10-2. For the output 
sample of the PCL fonts list, see "The Lists Common to Certain Settings in the Print 
Mode," on p. 10-5.

CONFIG.PAGE

-

Prints the capacity of the built-in memory (RAM) or the contents specified in the 
SETUP menu. You can select this item regardless of the setting for the print mode.

NOTE

CONFIG.PAGE is designed to be printed on A4 size paper. Load a sheet of A4 size 
paper in the paper cassette or multi-purpose tray.

PCL UTILITY

FONTS LIST

Prints internal information of the printer in the PCL mode.

FONTS LIST

A list of the fonts that can be used in the PCL mode is printed.

CLEANING

A4, LTR

The printer cleans the fixing roller by printing a cleaning page.

You can select paper of "A4" size or "LTR" size for printing a cleaning page.

If CLEANING is executed, <CLEANING PAPER> is displayed. Load a sheet of 
A4/Letter size paper in the multi-purpose tray, then press the 

 (Online) key.

A cleaning paper is printed. Load the cleaning paper with the printed side facing 
up in the multi-purpose tray, then press the 

 (Online) key. The loaded cleaning 

paper is fed, cleaning inside fixing roller.

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments