manualshive.com logo in svg

Canon LBP 3370, User Manual, Page: 126 / 362

Share
Download
Canon LBP 3370 User Manual Download Page 126

4-29

P

aper Loading and Output 

T

ra

y

4

Loading Paper in the Paper Cassette

4

Hold down the paper as shown in the figure, then set it under 
the hooks (A) on the paper guides.

Check the following points.

•

Whether the paper stack does not exceed the load limit marks (B)

•

Whether there is sufficient space between the hooks of the paper guides and 
the paper stack

IMPORTANT

The following shows the paper capacity of the paper cassette. Be sure that the 
paper stack does not exceed the load limit marks. If the paper stack exceeds the 
load limit marks, this may result in misfeeds.
- Plain paper

Approx. 250 sheets (Ex. 80 g/m

2

)

- Heavy paper Approx. 200 sheets (Ex. 91 g/m

2

)

(A)

(B)

(A)

Summary of Contents for LBP 3370











































































































































































































































































































































































Reviews:

No comments