Canon LBP 3370 User Manual Download Page 159

Page: 159 / 362

5-10

The Pr

inting En

vironment

Menu Functions and Menu Operation

NOTE

•

The printer can switch back to online when it is ready to print. The printer is ready to print
when the

(Ready) indicator is on.

•

If you press [

] during the setting, the display goes back up the hierarchy.

•

If you press the

(Online) key during the setting, the setting is canceled.

•

In some options, the items are divided into two different hierarchies.

Display the SETUP menu.

Press the

(Settings) key.

The SETUP menu is displayed.

Select the option.

Press [

] or [

When the FEEDER MENU options are selected

The target option is displayed.

Display the item.

Press [OK].

The selected item is displayed.

Select the item.

Press [

] or [

When TRAY PAPER SIZE is selected

The target item is displayed.

Display the setting value.

Press [OK].

The selected setting value is displayed.

Select the setting value.

Press [

] or [

When B5 is selected

The target setting value is displayed.

Determine the selected setting value.

Press [OK].

Switch back to online state.

Press the

(Online) key.

SETUP

CONTROL MENU

→

FEEDER MENU

→

TRAY PAPER SIZE

→

TRAY PAPER SIZE

→

=A4

→

Summary of Contents for LBP 3370











































































































































































































































































































































































Search results

Summary of Contents for LBP 3370

Reviews:

Canon LBP 3370, User Manual, Page: 159 / 362

Search results

Summary of Contents for LBP 3370

Reviews: