Canon iR C6800 Series Portable Manual Download Page 326

Page: 326 / 456

PCHINT-
1

Use it to change the intervals of 1-patch detection (No. 1 limit) in terms

of the number of prints.

Use it to change the intervals of patch ATR for the No. 1 limit. A higher

limit will increase the downtime intervals, but will affect the density. On

the other hand, although a lower limit may decrease the downtime

intervals, the density will be more stable.

The following triggers are used to initiate patch detection:

1. when the 1st limit (20 prints) is exceeded, execute patch detection

during the last rotation of the ongoing job.

2. when the 2nd limit is exceed, stop the ongoing job and force patch

detection.

(1 print = 3 images (YMC only); for image count, 1 for small and 2 for

large)

The above No. 1 limit may be changes. A higher limit will increase

downtime intervals, but will affect density. On the other hand, although

a lower limit will decrease downtime intervals, the density will be more

stable.

By default, the No. 1 limit is 20 prints (60 images), variable between -10

and + 10 (offset).

Use it to change the intervals of 1-patch detection (No. 1 limit) in terms

of the number of prints.

settings range: -10 to +10

at time of shipment/upon RAM initialization: 0

PCHINT-
2

Use it to adjust the intervals of patch detection (No. 2 limit).

Use it to change the patch ATR intervals for the No. 2 limit.

For the triggers used to initiate patch detection, see the list for PCHINT-

Settings range: -10 to +10

at time of shipment/upon RAM initialization: 0

PCHINT-
V

Use it to adjust the intervals of patch detection (video counter cumulative

count).

Use it to change the intervals of patch ATR in relation to the video

counter cumulative count.

Settings range: -10 to +10

at time of shipment/upon RAM initialization: 0

COPIER>OPTION>BODY

Subheadi
ng

Contents

Level

Summary of Contents for iR C6800 Series









































































































































































































































































































































































































































































Search results

Summary of Contents for iR C6800 Series

Reviews:

Related manuals for iR C6800 Series

Brands by name

Popular brands

Canon iR C6800 Series, Portable Manual

Search results

Summary of Contents for iR C6800 Series

Reviews:

Related manuals for iR C6800 Series

Brands by name

Popular brands