Canon imageRUNNER ADVANCE 6075 Series, Service Manual

Page: 447 / 1406

4
4
4-126
4-126
Parts Replacement and Clearning > Image Formation System > Cleaning Photosensitive Drum
Parts Replacement and Clearning > Image Formation System > Cleaning Photosensitive Drum
Cleaning Photosensitive Drum
1) Moisten lint-free paper with 5 to 10 cc of alcohol solutions ; then, pour 0.2 to 0.3 g of the
drum cleaning powder (CK-0429) on the lint-free paper.
2) While butting the lint-free paper relatively strongly against the photosensitive drum, wipe
the surface of the drum from the front to the rear and from the rear to the front.
CK-0429
Lint-Free Paper
Alcohol Solutions
Drum Cleaning Powder
CAUTION:
• Keep the widths of cleaning to 5 to 10 cm in the peripheral direction of the drum.
• Move the lint-free paper back and forth 15 to 20 times over a single area. Forcing
the lint-free paper will not affect the life of the drum.
3) After the alcohol has evaporated, dry wipe the surface with the lint-free paper. If the area is
uneven, go back to the step 4, and increase the back-and-forth movements.
F-4-160
4) Rotate the drum for the width (5 to 10 cm), and repeat the step 3 through 5 until the entire
area of the surface has been cleaned.
F-4-161