Canon imageRUNNER ADVANCE 6075 Series, Service Manual

Page: 1184 / 1406

9
9
9-187
9-187
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Mirroring Board or Encryption Board
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Mirroring Board or Encryption Board
15) Secure the Signal Cable and the Power Supply Cable.
• 1 Edger Saddle
• 9 Wire Saddles
CAUTION:
• Secure the cables so that there is no extra slack of the cables at [A] part.
• Be sure that the Wire Saddle [B] is properly securing the cables.
• When the FAX Board is installed, be sure to avoid contact of the cable with the PCB
to secure the cable.
x10
[A]
[B]
F-9-400
CAUTION:
If there is extra slack of the cables, be sure to tuck them to the host machine side.
F-9-401
CAUTION:
Check that the connector of the Signal Cable is connected properly and that the cable
is not overloaded.
F-9-402