Canon imageRUNNER ADVANCE 6075 Series, Service Manual

Page: 1374 / 1406

XLV
XLV
Appendix > List of User Mode > Environment Settings > Network
Appendix > List of User Mode > Environment Settings > Network
Item Setting Description
Can be set in Remote
UI
Device Information
Delivery Available
Ethernet Driver Settings
Auto Detect On*, Off Yes No
Communication Mode Half Duplex*/Full Duplex Yes No
Ethernet Type 10 Base-T*, 100 Base-TX, 1000 Base-T Yes No
MAC Address Display only - No
IEEE802.1X Settings
Use IEEE802.1X On, Off* Yes No
Login Name 24 characters maximum Yes No
User Name of the user to be authenticated with IEEE802.1X authentication Yes No
Password Password of the user to be authenticated with IEEE802.1X authentication Yes No
TLS Settings
Use TLS On, Off* Yes No
Key and Certificate
Set as the Default Key - Yes No
Certificate Details Version/Serial Number/Signature Algorithm/Issue Destination/Start Date of Validity/End Date of Validity/Issuer/
Public Key/Cert.Thumbprint/Certificate
Yes No
Display Use Location Displays what the key pair is being used for. Yes No
TTLS Settings
Use TTL On, Off* Yes No
TTLS Settings MSCHAPv2*, PAP Yes No
PEAP Settings
Use PEAP On, Off* Yes No
Same User Name as Login Name On*, Off Yes No
Firewall Settings
IP Address Block Log Time, Category, IP Address, Result Yes No
IPv4 Address Filter
TX Filter Yes No
Use Filter On, Off* Yes No
Default Policy Allow*/Reject Yes No
IPv4 Address Up to 16 IPv4 addresses can be stored. Yes No
RX Filter
Use Filter On, Off* Yes No
Default Policy Allow*/Reject Yes No
IPv4 Address Up to 16 IPv4 addresses can be stored. Yes No
IPv6 Address Filter Yes No
TX Filter
Use Filter On, Off* Yes No
Default Policy Allow*/Reject Yes No
IPv6 Address Up to 16 IPv4 addresses can be stored. Yes No
RX Filter
Use Filter On, Off* Yes No
Default Policy Allow*/Reject Yes No
IPv6 Address Up to 16 IPv4 addresses can be stored. Yes No