Canon imagePROGRAF iPF6450, User Manual

Page: 997 / 1066

Cause Corrective Action
The type of paper specified in the printer
driver does not match the type loaded in
the printer. 1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Depending on the type of paper, printed
lines may be noticeably misaligned. Specify Proof in Print Priority in the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
→P.63
Borders appear during borderless printing
Borders appear during borderless printing
Cause Corrective Action
When executing borderless printing on A1 (594 mm) or A2
(420 mm) rolls, the Spacer for Borderless Printing was not
attached to the Roll Holder. For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included
Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
→P.533
The paper selected for borderless printing at actual size
was wider than the actual page size. For borderless printing at actual size, use roll paper that has the same width as
the actual page size.
(See "Borderless Printing at Actual Size.")
→P.91
There are spaces (margins) on the document. Make sure there are no register marks or transparent objects on the document.
Your application is configured to include spaces (margins). Check to see if your application is configured to include spaces (margins).
BordlessOversize is set to Little on the Control Panel
menu.
Set BordlessOversize to Standard on the Control Panel menu.
(See "Menu Settings.")
→P.663
iPF6450
Borders appear during borderless printing
User's Guide
Troubleshooting
Problems with the printing quality
997