manualshive.com logo in svg

Canon imageCLASS MP390, User Manual, Page: 139 / 189

Share
Download
Canon imageCLASS MP390 User Manual Download Page 139

Chapter 14

Troubleshooting

137

If there are repeated paper jams

Paper jams can occur repeatedly when the roller is not operating correctly, or print media is not 
loaded correctly. Paying attention to the following points, reload the paper or clean the roller.

The cover cannot be closed

The inner cover cannot be closed

The paper output tray cannot be closed

The paper output tray cannot be opened

Item to be checked

Checking point

Corrective action

Roller

Is the roller clean?

If the roller is dirty, clean it. (

See 

page 

135.)

Is the roller operating properly?

If the roller is not operating properly, 
contact your local authorized Canon dealer 
or the Canon help line.

Print media

Do the sheets of paper stick together? 

Fan the sheets of paper well before loading. 

Are the edges of the paper aligned?

Align the edges of the paper.

Is the paper guide adjusted correctly?

Adjust the paper guide correctly.

Does the paper stack exceed the paper limit 
mark? 

Make sure the paper stack does not exceed 
the paper limit mark when loading. 
(

See 

page 40.)

Is there any different type of print media in 
the paper stack? 

Only use the same type of paper.

Does the print media meet the requirements 
of this machine?   

Use the print media meeting the 
requirements of this machine. (

See 

page 

33.)

Cause

Action

The scan unit is returned to its 
original position before the inner 
cover is closed.

Lift the scan unit until it locks into place, and close the inner cover 
by pressing the center of the cover until the cover locks into place. 
Then, return the scan unit to its original position.

Cause

Action

The inner cover is not closed 
properly.

Lift the scan unit until it locks into place, then press the center of the 
inner cover until the cover locks into place.

Cause

Action

The machine is not placed on a flat 
surface. 

Place the machine on a flat surface. 

Summary of Contents for imageCLASS MP390






























































































































































































Reviews:

No comments