Canon imageCLASS MP390 User Manual Download Page 100

Page: 100 / 189

Sending Faxes

Chapter 8

Sending methods

There are two methods of sending faxes:
• Sending from your machine (memory sending)
• Sending from your computer (See

Software Guide

This section explains how to use these methods.

Sending from your machine (memory sending)

Follow this procedure:

Sending faxes from your computer

With your machine connected to your computer, you can send faxes from the computer. For details,
see

Software Guide

Load the document on the platen glass.

NOTE

• For details on how to load documents, see page 32.

Press [FAX].

Adjust the settings for your document as necessary.

NOTE

• To select the image quality (fax resolution), see page 97.
• To select the scan contrast, see page 97.

Dial the recipient’s number using the numeric keys or directory dialing.

NOTE

• For details on how to use directory dialing, see page 99.

Press [Color] for color sending, or [Black] for black & white sending.

• The LCD displays the following message when the first document is scanned.

IMPORTANT

• Color sending is available only when the recipient’s fax machine supports color faxing.

For a multipage document, load the next page and press [Color] or [Black].

IMPORTANT

• If you do not press the same key you pressed in step 5, the machine does not start scanning.

Press [OK] to start sending.

NOTE

• To cancel sending before sending a fax, press [Stop/Reset].
• To cancel memory sending while sending a fax, follow any instructions on the LCD after

pressing [Stop/Reset].

NEXT PAGE :START

END SCANNING:OK

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 100 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: