Canon imageCLASS MP390 User Manual Download Page 82

Page: 82 / 189

Photo Printing Directly from a Digital Camera

Chapter 6

Media types for a digital camera

You can use the following Canon media:

IMPORTANT

• When loading the print media in the multi-purpose tray, load it with the glossy side facing up.

Printing directly from a digital camera

This section describes how to connect a digital camera to the machine and how to print
photographs.

IMPORTANT

• While using the machine, do not disconnect and connect the USB cable.
• Do not connect the digital camera to the machine while using the machine as a copier, scanner, fax, or

printer.

Follow this procedure:

Digital Camera Setting

Media Type

Media Size

Card #1

Photo Paper Pro

101.6 mm

152.4 mm/4 in.

6 in.

Card #2

Photo Paper Plus Glossy

101.6 mm

152.4 mm/4 in.

6 in.

Card #3

Photo Paper Plus Glossy

127 mm

177.8 mm/5 in.

7 in.

Photo Paper Pro or Photo
Paper Plus Glossy

LTR

Photo Paper Pro or Photo
Paper Plus Glossy

Letter

Turn ON the machine, and load the print media in the multi-purpose tray.

NOTE

• For details on print media, see page 33.
• For details on how to load print media, see page 40.

Ensure that the digital camera is turned OFF.

Connect the digital camera to the
machine with the USB cable that came
with the digital camera.

NOTE

• When connected, the digital camera will

automatically turn ON. If not, turn it ON manually.

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 82 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: