Chapter 3
Print Media Handling
39
Setting the paper thickness lever
The paper thickness lever adjusts the gap between the print head and the print media to suit the print
media’s thickness. Before printing, be sure to set the paper thickness lever.
IMPORTANT
• Set the paper thickness lever to the left when receiving faxes.
Follow this procedure:
1
Lift the scan unit until it locks into place
.
• When the machine is ON, the paper output tray
automatically opens when the scan unit is lifted
.
If the paper output tray does not open, press the
Open button to open the paper output tray.
• The print head holder moves to the middle.
2
Open the inner cover.
3
Move the paper thickness lever
to the
right or left according to the print media
type .
NOTE
• For the appropriate paper thickness lever position
for each print media type, see page 33.
4
Close the inner cover.
CAUTION
• Press the center of the inner cover until the cover locks into place.
• Printing with the inner cover open may result in injury.
5
Return the scan unit to its original position.
• The LCD displays the following message.
Click
1
A
INK TANK CHANGED?
- YES NO +