manualshive.com logo in svg

Canon imageCLASS MP390, User Manual, Page: 77 / 189

Share
Download
Canon imageCLASS MP390 User Manual Download Page 77

Chapter 5

Photo Printing from a Memory Card

75

Printing a range of images

This printing method prints a range of photographs in sequence on a memory card. In order to select 
the photographs to print, first print the index and note the image numbers assigned to them. You 
can also print a range of images according to the recorded dates of photographs you select. To print 
an index, see page 71.

Follow this procedure:

21

Press [Color]. 

NOTE

• To cancel printing, press [Stop/Reset].
• The image printed is enlarged or reduced automatically according to the print media size. 

Depending on the print media size, the photographs may be cropped even if borderless printing 
is not selected.

• Pressing [Black] does not start printing.

1

Turn ON the machine, and load the correct print media in the 
multi-purpose tray.

NOTE

• For details on print media, see page 33. 
• For details on how to load print media, see page 40.

2

Insert the memory card. (See page 59.)

3

Press [PHOTO].

4

Press [Menu] repeatedly until <

1.PHOTO PRINT MODE

> appears.

5

Use [ ] or [ ] to select <

SELECT RANGE

>.

6

Press [OK].

1.PHOTO PRINT MODE

 

    

 

INDEX      

1.PHOTO PRINT MODE

  

 SELECT RANGE   

Summary of Contents for imageCLASS MP390






























































































































































































Reviews:

No comments