Canon imageCLASS MP390 User Manual Download Page 177

Page: 177 / 189

Chapter 15

Appendix

175

For photo printing

NOTE

• In order to obtain optimally attractive print results, when printing photographs, use Canon-recommended photo

paper pro or photo paper plus.

For Photo Index Sheet printing

IMPORTANT

• For printing a Photo Index Sheet, use only white plain paper. If you print a Photo Index Sheet on paper such

as recycled paper that is not very white, it may not be read correctly by the machine.

Paper type displayed in LCD

Suitable paper types

PHOTO PAPER PRO

Suitable for photo paper pro.

PLAIN PAPER

Suitable for plain paper.

HIGH RES. PAPER

Suitable for high resolution paper.

PHOTO PAPER PLUS

Suitable for photo paper plus glossy.

GLOSSY

Suitable for glossy photo paper and high gloss photo film.

OTHER PHOTO PAPER

Suitable when using photo paper other than that described
above (such as matte photo paper), or if you do not know the
paper type.

Paper type settings available

Suitable paper types

Plain Paper

Suitable for plain paper.

Photo Paper

Suitable for photo paper pro and photo paper plus.

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 177 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: