Canon imageCLASS MP390 User Manual Download Page 69

Page: 69 / 189

Chapter 5

Photo Printing from a Memory Card

Printing all images

This printing method will individually print all photographs stored on a memory card.

Follow this procedure:

Press [Photo Index Sheet].

Use [ ] or [ ] to select <

SCAN

Press [OK].

• The machine reads the Photo Index Sheet, and prints photographs according to

the settings.

IMPORTANT

• If the LCD displays <

SCANNING ERROR

>, press [OK] and ensure that a circle is filled for

each setting item.

• If the filled circles on the Photo Index Sheet are not dark enough, the machine may not

read the settings.

• Do not remove the memory card while the machine is printing.
• If the platen glass is soiled, the machine may not read the settings.

NOTE

• To cancel printing, press [Stop/Reset].
• To continue to print photographs using the subsequent Photo Index Sheets, repeat steps 8 to 14.

Turn ON the machine, and load the correct print media in the
multi-purpose tray.

NOTE

• For details on print media, see page 33.
• For details on how to load print media, see page 40.

Insert the memory card into the card slot. (See page 59.)

Press [PHOTO].

Press [Menu] repeatedly until <

1.PHOTO PRINT MODE

> appears.

[PHOTO INDEX SHEET]

PRINT < SCAN >

1.PHOTO PRINT MODE

INDEX

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 69 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: