manualshive.com logo in svg

Canon imageCLASS MP390, User Manual, Page: 25 / 189

Share
Download
Canon imageCLASS MP390 User Manual Download Page 25

Chapter 1

Introduction

23

Main components and their functions

This section provides the name and location of main components of this machine, and also 
describes their functions.

Machine

Tray extension

Supports print media loaded on the multi-purpose tray. Pull it out before 
loading print media.

Multi-purpose tray

Used to load print media.

Operation panel

Displays the operating status of the machine. It is also used to change or 
check the settings of each function. For details, see page 25.

Card slot cover

Covers the card slot. Open this cover when inserting a memory card or 
CF card adapter containing a memory card into the card slots.

Tray extension

Supports printouts. Grasping the notch, pull this out before copying or 
printing. When not being used, keep it closed in the paper output tray.

Paper output tray

Printouts are output to this tray. Open this tray before you start copying 
or printing, by pressing the Open button. If closed, the tray will 
automatically open when the machine starts to copy or print.
When not being used, keep it closed in the machine.

Document cover

Covers the platen glass. Open this cover when loading a document on 
the platen glass.

Platen glass

Used to load a document to be processed.

USB connector (for 
digital camera)

Used to connect a “PictBridge”- or Canon “Bubble Jet 
Direct”-corresponding digital camera or digital video camcorder to the 
machine when printing images directly from the camera. For details, see 
page 79.

Open button

Press this button to open the paper output tray accommodated in the 
machine.

IMPORTANT

• The paper output tray will not open when the machine is placed on a tilted surface.

z

Exterior

Summary of Contents for imageCLASS MP390






























































































































































































Reviews:

No comments