manualshive.com logo in svg

Canon imageCLASS MP390, User Manual, Page: 128 / 189

Share
Download
Canon imageCLASS MP390 User Manual Download Page 128

126

Maintenance

Chapter 13

Resetting the ink counter

The ink counter keeps track of how much ink is left in the ink tanks, enabling the machine to warn 
you when ink is running low. Thus, reset the ink counter when replacing ink tanks. Also you can 
check the current ink level of the ink tanks at any time. 
When you replace an ink tank, the LCD will automatically prompt you to reset the ink counter. 
However, if for any reason you did not reset the ink counter when replacing the ink tanks, follow 
this procedure to reset it. 

NOTE

•

 You can also reset the ink counter from your computer. (See 

Software Guide

.)

• The ink counter cannot be reset while the Alarm lamp is lit.

Follow this procedure:

9

Return the scan unit to its original position. 

• The LCD displays a message asking if you replaced an ink tank.

10

Press [ ].

• The LCD displays a message asking if you replaced the black ink tank.

l

11

If you replaced the black ink tank, press [ ]. If you did not, press [ ]. 

• The LCD displays a message asking if you replaced the color ink tank.

12

If you replaced the color ink tank, press [ ]. If you did not, press [ ]. 

• The ink counter is now reset, and replacement of the ink tanks is completed. 

NOTE

• To check the ink level of the ink tanks at any time, see page 127. 
• Pressing [ ] does not reset the ink counter. Be sure to press [ ] if you replaced the ink tank. 
• If you pressed [ ] by mistake, follow the procedure to reset the ink counter. (See page 126.)

1

Press [Additional Functions].

2

Use [ ] or [ ] to select <

2.INK VOLUME

>.

3

Press [OK].

INK TANK CHANGED?

 - YES         NO +

BLACK INK CHANGED?

 - YES         NO +

COLOR INK CHANGED?

 - YES         NO +

PC

USER DATA

 2.INK VOLUME

INK VOLUME

 1.LOW INK WARNING

Summary of Contents for imageCLASS MP390






























































































































































































Reviews:

No comments