manualshive.com logo in svg

Canon imageCLASS MP390, User Manual, Page: 163 / 189

Share
Download
Canon imageCLASS MP390 User Manual Download Page 163

Chapter 14

Troubleshooting

161

• For more details, refer to the user’s manual for the digital camera or digital video camcorder. 
For a problem with the digital camera or digital video camcorder, contact the service center for the 
camera.

Error message on camera

Cause

Action

Printer in use

Images are being printed from 
the computer. 

Wait until printing ends.

Printer warming up. 

Printer is warming up for 
printing. 

Wait until warm-up ends. 

No paper

No paper is loaded. 

Load the paper in the multi-purpose tray and 
press [OK]. 

Paper jam

A paper jam has occurred in the 
machine. 

Remove the jammed paper, load new media, 
and press [OK]. 

Printer cover open

The scan unit is open.  

Return the scan unit to its original position.

No print head

• No print head is installed. 
• The print head is defective. 

• Install a print head. (See 

Set-Up Guide.

) 

• Contact your local authorized Canon dealer or 

the Canon help line.

Waste tank full

The waste ink tank is nearly 
full. 

Press [Stop/Reset] on the machine to recover 
from the error. Printing can continue for a little 
while. However, when the waste tank becomes 
full, printing will be disabled. Contact your 
local authorized Canon dealer or the Canon help 
line as soon as possible.

Paper lever error

Incorrect position of the paper 
thickness lever. 

Adjust the paper thickness lever to the left 
position (for plain paper). 

Printer error

An error requiring servicing 
has occurred. 

Turn OFF the machine, unplug the power cord 
from the power supply, plug the power cord back 
in after 15 seconds, and then turn ON the 
machine. If the same error occurs, contact your 
local authorized Canon dealer or the Canon help 
line.

Summary of Contents for imageCLASS MP390






























































































































































































Reviews:

No comments